2.4k Aufrufe
Gefragt in HW-Sonstiges von
Hi,

das Handbuch meines Mainboards sagt folgendes:

The mainboard supports ATX power supply for the power system. Before
inserting the power supply connector, always make sure that all components are
installed properly to ensure that no damage will be caused

ATX 24-Pin Power Connector: ATX1

This connector allows you to connect an ATX 24-pin power supply. To
connect the ATX 24-pin power supply, make sure the plug of the
power supply is inserted in the proper orientation and the pins are
aligned. Then push down the power supply firmly into the connector.
You may use the 20-pin ATX power supply power supply
as you like. If you’d like to use the 20-pin ATX power supply, please
plug your power supply along with pin 1 & pin 13 (refer to the image
at the right hand). There is also a foolproof design on pin 11, 12, 23
& 24 to avoid wrong installation.

ATX 12V Power Connector: JPW1

This 12V power connector is used to provide power to the CPU.

MSI Reminds You...
1. These two connectors connect to the ATX power supply and have to
work together to ensure stable operation of the mainboard.
2. Power supply of 350 watts (and above) is highly recommended for
system stability.
3. ATX 12V power connection should be greater than 18A.


Und dieses ATX Netzteil soll's sein:

www.alternate.de/html/product/Netzteile_bis_600_Watt/be_quiet!/Straight_Power_BQT_E6-450W/295140/?tn=HARDWARE&l1=Energie&l2=Netzteile&l3=bis+600+Watt

Muss ich jetzt den 24pin Stecker und den 4pin 12v stecker verwenden, oder den 20pin und den 4pin 12v? (Wenns überhaupt passt)

danke schonmal

2 Antworten

0 Punkte
Beantwortet von lutz1965 Profi (18.9k Punkte)
Hallo

hättes Du uns die Bezeichnung vom Mainboard gesagt, hätte man es genau sagen können.

Aber gut, das netzteil passt ist gut und läuft auf fast allen Mainboards.
0 Punkte
Beantwortet von
Hallo,

sry, es ist das

MSI MS-7046 (Medion OEM)

und hier gibts das Hnadbuch dazu.

www.heimir.de/ms7046/

Ok, danke und muss ich jetzt den 24pin Stecker und den 4pin 12v stecker verwenden, oder den 20pin und den 4pin 12v?
...