Supportnet / Forum / WindowsXP
Paritätsfehler????
Frage
Hallo Leute, in der Ereignisanzeige stand heute drin, daß ein Paritätsfehler aufgetaucht ist. Was ist ein Paritätsfehler????? Benutze XP-Home.
Vielen Dank
Antwort 1 von toutdesuit
Hi die frage ist was für eine Art Paritätsfehler ist das.
z.B wird eine Paritätsprüfung,
(wenn ein Computer mit Paritätsprüfung arbeitet) im DRAM-Speicher mit jedem Datenbyte ein Paritätsbit gespeichert. Aufgrund dieses Paritätsbits, kann die Speichersteuereinheit unter Verwendung eines Paritätsprotokolls die Integrität der Daten überprüfen.
Es gibt aber auch Paritätsprüfungen für hardware etc.
Jürgen
Antwort 2 von CarmenB
Hi Jürgen,
die Meldungen lauten:
" Ein Paritätsfehler wurde auf \Device\Ide\Ide Port0 gefunden
und "der Treiber hat einen Controllerfehler auf \Device\Harddisk 1\D gefunden"
Vielen Dank
Carmen
die Meldungen lauten:
" Ein Paritätsfehler wurde auf \Device\Ide\Ide Port0 gefunden
und "der Treiber hat einen Controllerfehler auf \Device\Harddisk 1\D gefunden"
Vielen Dank
Carmen
Antwort 3 von CarmenB
Hilfe!!!!!!!!
Carmen
Carmen
Antwort 4 von POwerDAU
hallo erstmal
gib mal die event-nummer an, fehler doppelklicken und im fenster steht dan "event-id"
dann gib die mal hier ein
http://www.eventid.net/search.asp
und dann schauen mer mal :-)
so long
POwerDAU
gib mal die event-nummer an, fehler doppelklicken und im fenster steht dan "event-id"
dann gib die mal hier ein
http://www.eventid.net/search.asp
und dann schauen mer mal :-)
so long
POwerDAU
Antwort 5 von CarmenB
@POwerDau,
der Paritätsfehler hat die Nummer 5 und der Controllerfehler wird mit 11 bezeichnet.
Leider verstehe ich die Texte nicht, da meine Englischkenntnisse sehr bescheiden sind.
Carmen
der Paritätsfehler hat die Nummer 5 und der Controllerfehler wird mit 11 bezeichnet.
Leider verstehe ich die Texte nicht, da meine Englischkenntnisse sehr bescheiden sind.
Carmen
Antwort 6 von POwerDAU
hallo nochmals
also, paritätsfehler wie deiner einer haben meiner meinung nach zwei mögliche ursachen, entweder deine HD möchte einen anderen stecker haben, siehe dazu mehr hier
http://www.winhelpline.info/forum/showthread.php?s=&postid=208178
oder aber es geht nach microsofts meinung um den ultra DMA modus der festplatte, mehr dazu hier
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q262448
probiers mal aus, und meld dich allenfalls nochmals mit näheren infos (noch näher, lechz)
so long
POwerDAU
also, paritätsfehler wie deiner einer haben meiner meinung nach zwei mögliche ursachen, entweder deine HD möchte einen anderen stecker haben, siehe dazu mehr hier
http://www.winhelpline.info/forum/showthread.php?s=&postid=208178
oder aber es geht nach microsofts meinung um den ultra DMA modus der festplatte, mehr dazu hier
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q262448
probiers mal aus, und meld dich allenfalls nochmals mit näheren infos (noch näher, lechz)
so long
POwerDAU
Antwort 7 von POwerDAU
die suchergebniss bei eventid.net bin ich dir noch schuldig, sorry,
also, event Nr. 5
zu finden hier
http://www.eventid.net/display.asp?eventid=5&source=
4ter eintrag
und Event Nr. 11
zu finde hier
http://www.eventid.net/display.asp?eventid=11&source=
2ter eintrag
so long
PowerDAU
also, event Nr. 5
Zitat:
Source
Atapi
Type
Error
Description
A parity error was detected on \Device\Ide\IdePort0.
Comments
Adrian Grigorof: As per Microsoft: "ATA66 DMA transfer mode is not supported for the onboard IDE controller." See the link below.
One user solved this by disabling DMA in the BIOS and disabling the Write Cache in Windows 2000.
Links
Q262448
Contributors
Adrian Grigorof , Victor Oddy
Source
Atapi
Type
Error
Description
A parity error was detected on \Device\Ide\IdePort0.
Comments
Adrian Grigorof: As per Microsoft: "ATA66 DMA transfer mode is not supported for the onboard IDE controller." See the link below.
One user solved this by disabling DMA in the BIOS and disabling the Write Cache in Windows 2000.
Links
Q262448
Contributors
Adrian Grigorof , Victor Oddy
zu finden hier
http://www.eventid.net/display.asp?eventid=5&source=
4ter eintrag
und Event Nr. 11
Zitat:
Source
Disk
Type
Error
Description
The driver detected a controller error on \Device\Harddisk0\DR0
Comments
Adrian Grigorof: As per Microsoft: "ATA66 DMA transfer mode is not supported for the onboard IDE controller." See the link below.
One user solved this by disabling DMA in the BIOS and disabling the Write Cache in Windows 2000.
Anonymous: This error is more likely to have been caused if Intel ATA Mass Storage device driver is installed or if it is an incorrect version. This is especially true if Roxio EZCD Creator is installed. Possible solutions include: Uninstall the Intel driver and reinstall after Roxio EZCD Creator, simple do not use the Intel driver.
Kane: I've been encountering this problem for ages. At seemingly random times, my computer would lock itself solid. I had updated the bios on my motherboard to no avail. It finally turns out that the culprit is the USB CompactFlash reader attached to my machine. Any CF cards are mounted as IDE devices, even though they are really connected via USB. Simply removing any CF cards when they are not in use fixed this problem.
Links
Q262448 , Q154690
Contributors
Adrian Grigorof , Victor Oddy , Anonymous , Kane
Source
Disk
Type
Error
Description
The driver detected a controller error on \Device\Harddisk0\DR0
Comments
Adrian Grigorof: As per Microsoft: "ATA66 DMA transfer mode is not supported for the onboard IDE controller." See the link below.
One user solved this by disabling DMA in the BIOS and disabling the Write Cache in Windows 2000.
Anonymous: This error is more likely to have been caused if Intel ATA Mass Storage device driver is installed or if it is an incorrect version. This is especially true if Roxio EZCD Creator is installed. Possible solutions include: Uninstall the Intel driver and reinstall after Roxio EZCD Creator, simple do not use the Intel driver.
Kane: I've been encountering this problem for ages. At seemingly random times, my computer would lock itself solid. I had updated the bios on my motherboard to no avail. It finally turns out that the culprit is the USB CompactFlash reader attached to my machine. Any CF cards are mounted as IDE devices, even though they are really connected via USB. Simply removing any CF cards when they are not in use fixed this problem.
Links
Q262448 , Q154690
Contributors
Adrian Grigorof , Victor Oddy , Anonymous , Kane
zu finde hier
http://www.eventid.net/display.asp?eventid=11&source=
2ter eintrag
so long
PowerDAU
Antwort 8 von CarmenB
@PowerDau, ich probiere gerade etwas aus. Da hier gerade das Gewitter tobt, werde ich mich später melden. Es ist also keine Unhöflichkeit meinerseits.
Vielen Dank
Carmen
Carmen
Vielen Dank
Carmen
Carmen
Antwort 9 von CarmenB
Ach so, welche Konsequenzen haben diese Fehler???
Carmen
Carmen